Clarinet Systems ESB3011b Manual do Utilizador

ESB3011b Getting Started Guide

AP light is off after I’ve configured and rebooted the switch. Check to see if the ESSID, WEP Encryption and Default Tx Key match with your Access

ESB3011b 802.11b access point (Not included) Handheld PC Up to 4Mbps from handheld to switch via IR 802.11b Uplink

TABLE OF CONTENTS SETUP ESB3011B HARDWARE 4 CONFIGURE ESB3011B SETTING 4 USING WINDOWS CONFIGURATION TOOL: 5 USING PALM CONFIGURATION TOOL: 8 TROUB

Setup ESB3011b Hardware The ESB3011b comes equipped with: ! EthIR Switch single port ! EthIR Beam with mini-DIN connector ! 110/220 power suppl

Note: The ESB3011b assigns the primary IP address to the connecting IR device. Therefore, the switch is not accessible for configuration while an

3. Click on the Edit Configuration button and an IP Editor window will appear. 4. In the General Information tab, please check the Use DHCP box

5. In the RF-Card Info tab, please modify the ESSID field and select Open System Authentication, no encryption, or Shared Key Authentication, enabl

6. If Shared Key Authentication is selected, please go to the WEP tab and select either 64-bit or 128-bit in the Encryption Key field and enter the

3. Pull down the drop-down menu on the upper-right-hand corner and select LAN Related option. Check the Switch Use DHCP box if DHCP is used. If